Simple, Fast . . .Beta
| |
ENGINE
Accessories |
 |
Billet Oil Fill Plug
Easier to remove than the stock plastic plug. Will not melt under
extreme heat.
Has Beta logo on top!
Made in the USA
AB-20006 $19.99 |
 |
Billet Gas Cap
Stronger than stock, for that factory look.
AB-12009 $64.95 |
 |
Oil Filter Cap
Helps improve lap times!
AB-12010 $29.99 |
 |
Engine Screw Cap Set
Includes four red billet caps to replace the stock black items.
AB-12011 $12.99 |
 |
Cam Chain Tensioner Cap
Beautiful billet piece to enhance your ride!
AB-12012 $29.99 |
 |
Oil Filler Cap
Will not distort under hot conditions, easier to
remove.
AB-12013 (Sold Each) $19.99 |
 |
Billet aluminim plug that includes a magnet for catching debris.
Made by Zip-Ty Racing
AB-12004 $24.95 |
 |
Air Mixture Screw
Allows rider to adjust mixture with no tools.
Manufactured in the USA
AB-20007 $29.99 |
 |
Pre-oiled,
in a sealed zip-lock bag. Dual stage design.
Very high quality!
Made
by Twin Air
AB-12001 $29.99 |
 |
Clutch Cylinder Guard
Used to protect the clutch slave cylinder. Note:does not work
with front sprocket guard or 15 tooth sprocket. Has Beta Logo
on front. Manufactured in the USA
AB-20009 $37.99 |
 |
For tight trail riding conditions.
Turns on and off through
the use of a thermoswitch.
Made by Beta
AB-10274 $159.95 |
 |
Race
Wire Loom
Eliminates all extra wiring.
Retains electric starter
and lights only.
AB-10273 $107.95 |
 |
Air
Box Cover
Goes in
place of air filter while washing out airbox or while servicing filter.
Made by Twin Air
AB-10185 $32.99 |
| |
CHASSIS |
 |
Scotts Stabilizer
The Scotts Steering Stabilizer is a compact, fully adjustable,
hydraulic shock absorbing stabilizer that mounts to your steering
head area.
AB-10282 (Stock bar position) $499.00 |
|
Scotts Stabilizer
The Scotts Steering Stabilizer is a compact, fully adjustable, hydraulic
shock absorbing stabilizer that mounts to your steering head
area.
AB-10283 (forward bar position) $499.00 |
 |
Designed
to add bling to your Beta. Should make you go faster!
Made in
Italy
AB-10188 (red) $79.99 |
 |
Designed to add bling to your Beta. Should
make you go faster!
Made in Italy
AB-10187 (black) $79.99 |
 |
Includes 5mm billet spacer. Installs under the stock handlebar
mount.
Manufactured by Boano Racing
AB-10193 $28.99 |
|
Includes 10mm billet spacer. Installs under the stock handlebar
mount.
Manufactured by Boano Racing
AB-10192 $28.99 |
 |
Fits all stock and billet clamps for your Beta.
Manufactured in Italy
AB-10135 $149.99 |
 |
Billet aluminum "shorty" clutch lever.
Anodized adjuster included. Works well with hand guards.
Manufactured by Boano Racing
AB-10186 $69.99 |
 |
Billet Chain Blocks
(fits all Betas)
Machined location lines
for perfect chain adjustment
AB-10280 $69.95 |
 |
Povides a smooth throttle. Aluminum end cap included,
can be removed to work with hand guards.
Made in the USA
AB-10134 $63.95 |
 |
Dual Material Rear Sprocket
Designed by Super Sprox in Italy.
Aluminum inner hub with steel sprocket teeth.
Made in Italy
AB-10249 (49t) $84.99 |
|
Dual Material Rear Sprocket
Designed by Super Sprox in Italy.
Aluminum inner hub with steel sprocket teeth.
Made in Italy
AB-10250 (50t) $84.99 |
|
Dual Material Rear Sprocket
Designed by Super Sprox in Italy.
Aluminum inner hub with steel sprocket teeth.
Made in Italy
AB-10248 (48t) $84.99 |
 |
Developed
by PBI for a perfect fit. Made in USA
AB-10045 (45t) $55.99 |
|
Developed by PBI
for a perfect fit. Made in USA
AB-10048 (48t) $55.99 |
|
Developed by PBI
for a perfect fit. Made in USA
AB-10050 (50t) $55.99 |
|
Developed by PBI for
a perfect fit. Made in USA
AB-10052 (52t) $55.99 |
 |
Turn
your Beta into a weekend canyon bike! Kit includes 17" Rims,
hubs, hardware, bearings, shorter side stand, and front fender.
*does not include tires*
Manufactured by Beta
AB-12008 (2009-2010) $1299.00 |
 |
Includes wheel bearings.
Also includes front brake rotor (not shown).
Tire not included.
Made by Beta
AB-10103 $649.00 |
 |
Includes wheel bearings.
Also includes rear brake rotor and rear
sprocket (not shown).
Tire not included.
Made by Beta
AB-10104 $769.00 |
|
Add
Bling to your Beta.
Replaces the stock clevis on the rear brake pedal.
Made in the USA
AB-10202 $39.95 |
 |
Beta
Factory Pegs
E
xtra wide for
better support.
Stainless pins for added boot grip.
Manufactured
by Beta/Boano
AB-10101 $219.99 |
| |
|
| |
|
| |
PROTECTION |
 |
Soft Seat Foam
Great for those long rides!
$69.95 AB-10500 |
 |
Tall Seat Foam
Adds about 1 ½ “ to seat height. Designed for
riders over six feet tall.
(*Must use seat cover AB-10502)
$69.95 AB-10501 |
 |
Gripper Seat Cover
(standard
foam)
Fits standard height
seat foams
$69.95 AB-10503 |
 |
Gripper Seat Cover
(tall foam)
Larger
cover to fit tall seat foams
$69.95 AB-10502 |
 |
Factory Beta hand guards. Easy
to install. All mounting hardware included.
Made in Italy
AB-10108 $64.99 |
 |
Developed by Enduro Engineering
for Beta. Fits all Beta handlebars.
Hand guard wings sold separate.
Made by Enduro Engineering
AB-10165 $78.99 |
 |
For use with AB-10165. Provides
excellent hand AND clutch/brake protection.
Made by Enduro Engineering
AB-10166 $24.95 |
 |
For use with AB-10165. Provides
excellent hand AND clutch/brake protection.
Made by Enduro Engineering
AB-10168 $24.95 |
 |
For use with AB-10165. Provides
excellent hand AND clutch/brake protection.
Made by Enduro Engineering
AB-10167 $24.95 |
 |
Billet
aluminum, for the rocky sections.
Manufactured in the USA
AB-10389 $149.99 |
| |
EXHAUST |
 |
FMF
Powercore
Add performance to your Beta! Includes removable spark arrestor
screen. Manufactured by FMF.
AB-10271 $349.00
|
 |
This is a complete system that includes a removable spark arrestor,
quiet inserts, carbon fiber guard, and spring tool. Saves 5 lbs!
Made in Italy
AB-10272 MSRP: $1099.00 - sale Price of
$949.00! |
| |
Suspension
Settings:
*Stock rear
spring is a 5.2 (170-190 lbs) |
 |
Rear
Spring 5.2 (170-190 lbs)
AB-10152 (5.2 kg, stock setting) $134.99 |
|
Rear
Spring 5.4 (195-215)
AB-10154 (5.4 kg)
$134.99 |
|
Rear
Spring 5.6 (220-235)
AB-10156 (5.6 kg) $134.99 |
|
Rear Spring 5.8 (240-255
lbs)
AB-10158 (5.8
kg) $134.99 |
|
AB-10160 (6.0 kg) $134.99 |
 |
020-340160-042 (.42 kg) $139.99 |
|
020-340160-045 (.45 kg) $139.99 |
|
020-340160-048 (.48 kg, stock setting)$139.99 |
|
020-340160-050 (.50 kg) $139.99 |
|
020-340160-052 (.52 kg) $139.99 |
 |
For all 45mm Marzocchi Shiver
forks. Sold as a set.
Manufactured in the USA
AB-10123 $39.99 |
 |
Factory Shock Preload
Adjuster
Adjust
with a socket! Billet Aluminum
AB-10276 $189.00 |
